DIY Paper Bats for Halloween

This post contains Amazon affiliate links. As an Amazon Associate I earn from qualifying purchases.

Making paper bats is a quick, satisfying Halloween craft that turns an ordinary sheet of black paper into a whole colony of decorations. The folded-paper method creates a bat with matching wings on both sides, so it works well for beginners, families, classroom activities, and anyone who wants seasonal décor without needing a large collection of supplies. Make a few in different sizes, then arrange them on a wall, door, or Halloween table for an easy spooky display.

Why you’ll love this craft

This project is approachable even if you have little crafting experience. There are no crochet stitches, yarn, or hook to learn: the main technique is folding paper, drawing a simple outline, and cutting carefully. The fold helps create a symmetrical bat, while a few creases give the wings a lifted, dimensional look.

Paper bats are also inexpensive and easy to make in batches. You can work on one at a time, changing the outline or scale as you go, and use the finished decorations in several parts of your home. It’s a useful choice for a last-minute Halloween display or a relaxed afternoon craft with older children. If children are involved, an adult should handle or supervise the scissors, especially when cutting small details.

“I made a few different sizes for the wall, and the fold made it much easier to get matching wings. The small creases were my favorite part—they made the bats look much more lively.”

Before you begin

You’ll make a flat paper bat by drawing and cutting its shape from a folded sheet. The folded edge acts as the bat’s center, so when you open the paper, the left and right sides mirror one another. The process is simple: fold, sketch, cut, unfold, and crease the wings.

This is a beginner-friendly paper craft rather than a crochet pattern. No stitches, gauge, hook size, or yarn quantity apply. The time needed depends on how many bats you make and how detailed your outlines are; a simple shape takes only a short crafting session, while a large batch or intricate designs will take longer. Start with one easy outline before making smaller or more elaborate versions.

Supplies you’ll need

  • Black paper: Choose a sheet large enough for the size of bat you want. Standard craft paper is easy to draw on and cut. Thicker paper may hold wing creases more firmly, but it can take more effort to cut.
  • Scissors: Use scissors that can make controlled cuts. Smaller scissors may help with curved or narrow areas.
  • Pencil: A pencil lets you sketch the outline lightly before cutting.
  • Creasing tool (optional): Use this to make neat wing folds. The blunt edge of a similar tool can also work, provided it won’t tear or mark the paper.

DIY Paper Bats 🦇✂️ | Easy Halloween Craft

Step-by-step instructions

  1. Fold the paper in half. Place the black paper on a flat surface and bring one side over to meet the other. Press along the fold so it stays in place. The fold will form the center line of your bat.

  2. Draw half of the bat shape. With the paper still folded, sketch the bat outline on one side. Let part of the design meet the folded edge so the two halves remain connected when you cut. A simple outline with a head, body, and wing shape is easiest to cut. Keep the pencil marks light, and avoid drawing tiny points until you’re comfortable with the cutting.

  3. Cut out the shape while the paper is folded. Hold the folded paper steady and cut along your outline. Take your time around curves and points, turning the paper as needed rather than forcing the scissors through a tight turn. Keep the folded edge intact wherever it forms the bat’s center.

  4. Unfold the paper. Open the cutout gently and lay it flat. You should see a bat with matching sides. If a small area remains attached where you intended it to be open, trim it carefully; avoid pulling, as that can tear the paper.

  5. Crease the wings for dimension. Make a light fold in each wing to lift or shape it. A creasing tool can help create a neat line, but use gentle pressure so the paper doesn’t split. Try to make the wing folds similar on both sides for a balanced appearance.

  6. Make more bats in different sizes. Repeat the process with additional sheets or paper cut to different dimensions. Keep the same basic method, adjusting the outline to suit the available space. Make a test bat before cutting a large batch if you’re changing the shape or scale.

  7. Arrange your Halloween display. Place the bats on walls, doors, or a Halloween table. Before attaching them to a surface, check that the paper and the chosen attachment method are suitable for it. Arrange a few together in a loose group or spread them out for a more subtle display.

Ways to use your finished bats

Paper bats work especially well as lightweight seasonal decorations. Arrange a group on a wall to suggest a flight path, or place a few on a door as a simple Halloween welcome. For a table display, position them around other seasonal decorations, leaving enough room for serving dishes and everyday use.

Try mixing large and small bats to create a little visual movement. A few larger shapes can anchor a display, while smaller ones fill gaps. You can also repeat the same simple outline for a tidy, coordinated look, or vary the wing shapes slightly for a more informal cluster.

Because these bats are made from paper, they’re easy to take down and store, but they can crease or tear if handled roughly. Keep them away from damp areas and open flames. If you’re decorating a classroom or shared space, consider placing them where people won’t brush against them or pull at the wings.

Cleaning and storage

Paper decorations aren’t washable. Keep your bats dry and dust them lightly with a clean, soft cloth or a gentle brush if needed. Don’t scrub, soak, or use cleaning products: moisture and rubbing can soften the paper, blur pencil marks, or damage the cut edges.

When the season is over, store the bats flat between sheets of clean paper or in a wide envelope. Avoid placing heavy objects on top, which can flatten the wing creases or bend the cutouts. If you want to preserve the raised-wing effect, keep the bats in a container with enough room that nothing presses against them. Store them in a cool, dry place away from sunlight, which can fade or yellow some papers over time.

Tips for a neat result

  • Keep the fold crisp. Press the paper firmly before drawing. A clear center fold makes it easier to keep the two sides aligned.
  • Draw only the outline you need. Since the paper is folded, you usually need to sketch one half of the bat. The fold creates the matching half when you open the cutout.
  • Start with broad shapes. Wide wings and simple curves are easier to cut than narrow points or tiny notches. Add detail after you’ve tried a basic bat.
  • Cut slowly around tight curves. Small, controlled snips give you more control than long cuts. Turn the paper as you go instead of twisting your wrist sharply.
  • Protect the connected center. Check that the parts of your outline that meet the folded edge stay attached. Cutting through that edge can separate the two sides.
  • Test the crease before pressing hard. Make a gentle fold first. Thin paper can split if you force a sharp crease, while heavier paper may need a firmer but still controlled press.
  • Open the cutout carefully. Ease the paper apart from the fold rather than tugging at the wings. This helps prevent small tears.
  • Try a sample before making a set. A test bat shows whether your outline is easy to cut and whether its size suits the display area.

Creative variations

  • Change the scale. Use different sheet sizes or draw different-sized outlines to create a varied group. Larger bats need more paper and more room in the display; smaller bats may require more careful cutting.
  • Experiment with wing shapes. Make the wing edges rounded, gently scalloped, or pointed. More detailed edges can look striking, but they take longer to cut and are easier to damage.
  • Create a coordinated set. Repeat one outline in several sizes for a consistent display. This is a good option when decorating a long wall or a doorway.
  • Add a light contrast. Place the black bats against a pale wall or a contrasting background so their silhouettes stand out. If you add decorative marks or another paper layer, the finished bat may become heavier or thicker.
  • Adjust the wing creases. A shallow crease gives a subtle lift; a more pronounced fold creates stronger dimension. Crease both wings with a similar hand so the bat doesn’t look lopsided.
  • Make a simple scene. Arrange bats alongside other Halloween paper decorations, such as a moon or stars, if you already have them. Keep the shapes spaced so each one remains easy to see.

DIY Paper Bats 🦇✂️ | Easy Halloween Craft

Frequently asked questions

Is this a beginner-friendly Halloween craft?

Yes. The steps are folding, sketching, cutting, and creasing, so you don’t need crochet experience or specialized crafting skills. Start with a broad, simple outline and add detail once you’re comfortable cutting the shape.

Do I need a creasing tool?

No. The creasing tool is optional. You can fold the wings gently by hand, or use a blunt-edged tool to help make a clean crease. Avoid sharp objects that could cut or score through the paper.

How do I make the bat symmetrical?

Fold the paper in half and draw one side of the bat while the paper is still folded. Cutting through both layers at once produces matching sides when you open it. Keep the center connected along the folded edge.

What kind of paper should I use?

Black paper is the listed material. Standard craft paper is a practical choice because it is easy to draw on and cut. Thicker paper may hold its shape more firmly, but it can be harder to cut, especially around narrow details.

Can I make the bats different sizes?

Yes. Make additional bats with paper or outlines in different sizes. Larger shapes are easier to cut and more noticeable from a distance; smaller ones can fill spaces but may need simpler outlines to avoid delicate, easily torn details.

How can I stop the paper from tearing?

Use controlled cuts, especially around narrow points, and open the cutout gently. Avoid drawing very thin connections or pressing the creases too hard. If you’re unsure how a design will cut, try it first on a spare piece of paper.

How do I attach the bats to a wall or door?

The project instructions suggest using the bats as wall or door decorations but don’t specify an attachment method. Choose an option suitable for both the paper and the surface, and test it in an inconspicuous spot first. Some adhesives can mark paint or damage delicate finishes.

Can I wash or reuse the bats?

No. Paper bats should not be washed. They can be reused if they stay dry and are stored flat or in a roomy container. Handle the wings gently to preserve their creases.

Can I sell finished paper bats made with these instructions?

The instructions do not state whether finished items may be sold. If you plan to sell them, check the original designer’s usage terms first.

Print
clockclock iconcutlerycutlery iconflagflag iconfolderfolder iconinstagraminstagram iconpinterestpinterest iconfacebookfacebook iconprintprint iconsquaressquares iconheartheart iconheart solidheart solid icon

Paper Bats

5 Stars 4 Stars 3 Stars 2 Stars 1 Star

No reviews

Making paper bats is a quick, satisfying Halloween craft that turns an ordinary sheet of black paper into a whole colony of decorations. This project is approachable even if you have little crafting experience and is perfect for beginners, families, and classrooms.

  • Total Time: 40 minutes

Materials

  • Black paper: 1 sheet (large enough for bat size desired)
  • Scissors: 1 pair (small, for controlled cuts)
  • Pencil: 1 (for sketching the outline)
  • Creasing tool (optional): 1 (for neat wing folds)

Instructions

  1. Fold the paper in half. Place the black paper on a flat surface and bring one side over to meet the other. Press along the fold so it stays in place.
  2. Draw half of the bat shape. With the paper still folded, sketch the bat outline on one side. Keep the pencil marks light.
  3. Cut out the shape while the paper is folded. Hold the folded paper steady and cut along your outline. Keep the folded edge intact.
  4. Unfold the paper. Open the cutout gently and lay it flat. Trim any small areas that remain attached if needed.
  5. Crease the wings for dimension. Make a light fold in each wing, using gentle pressure with a creasing tool if necessary.
  6. Make more bats in different sizes. Repeat the process with additional sheets or paper cut to different dimensions.
  7. Arrange your Halloween display. Place the bats on walls, doors, or a Halloween table.

Notes

If children are involved, an adult should handle or supervise the scissors, especially when cutting small details. Keep the bats dry and dust them lightly if needed. Store them flat between sheets of clean paper when the season is over.

  • Author: marata-alibanti
  • Preparation Time: 10 minutes
  • Active Time: 30 minutes

Leave a Comment

Recipe rating 5 Stars 4 Stars 3 Stars 2 Stars 1 Star

Free Crochet Pattern
FREE
Pattern!
Free Crochet Pattern
FREE
Pattern!