This post contains Amazon affiliate links. As an Amazon Associate I earn from qualifying purchases.
The Family Room Crochet Blanket is a cozy, textured throw made with soft, bulky yarn and a simple repeating stitch pattern. Its openwork rows add a little visual interest without requiring complicated shaping, making it a relaxing project for crocheters who are comfortable with basic double crochet, chain, and slip stitch. It’s a practical blanket for a living room sofa, a favorite chair, or a thoughtful handmade gift.
Why you’ll love this pattern
This blanket is built from a small set of familiar stitches. Once you establish the first few rows, the body repeats the same pattern, so you can settle into a steady rhythm while watching the fabric grow. The stitch pattern is approachable for newer crocheters who have practiced double crochet and chain spaces, while still being engaging enough for more experienced makers.
The bulky yarn and large hook create a substantial blanket with a soft, plush feel. The finished fabric has a relaxed openwork texture rather than a dense, stiff surface. That makes the blanket comfortable to drape over a sofa or wrap around your shoulders.
The fringe is worked directly onto both short ends of the blanket. It adds a decorative finish without needing to make and attach separate fringe pieces afterward. In the main body, the repeated rows are also easy to pick up again after a break: check your last completed row, then continue with the same sequence.
“I liked that the stitch pattern was easy to remember after the setup rows. The blanket grew steadily, and the built-in fringe gave the ends a finished look without a separate finishing session.”
Before you begin
You’ll make a rectangular throw with a repeating double crochet and chain-space pattern. The project begins with a foundation chain and a full double crochet setup row. The next two rows establish the openwork pattern. After that, you repeat the third-row sequence until the blanket measures 40 inches from the beginning, finishing on a wrong-side row.
The fringe is crocheted along both short ends. Each fringe strand starts with a chain and is worked back with slip stitches, then secured to the blanket with slip stitches across two stitches. The written fringe instruction contains an incomplete phrase—“ending at .”—so it does not specify a final stitch or stopping point beyond repeating the sequence to the end of the row. Follow the written repeat across the edge, and do not add an unlisted finishing detail.
The pattern uses standard stitches: chain (ch), double crochet (dc), and slip stitch (sl st). The skill level is best described as confident beginner: you’ll need to recognize chain spaces, skip stitches as directed, and keep track of the row pattern. The total time depends on your pace, tension, and how often you work on it; the yarn is bulky, but the blanket still requires repeated rows to reach its stated length.
Before starting, check your yarn labels and make a small gauge swatch if you want to confirm how your tension and hook affect the fabric. No gauge measurement is provided in the instructions, so the recommended hook is a starting point rather than a specified target.
Materials you’ll need
- Yarn: Bernat® Sheepy® (8.8 oz/250 g; 149 yds/136 m), Orche (63012) — 4 balls
- Crochet hook: U.S. N/15 (10 mm), or the size needed to obtain gauge
The listed four balls provide a total of 596 yards (544 meters). Check that all balls are the same color and, where possible, from the same dye lot to help keep the blanket’s color consistent. The instructions call for Bernat® Sheepy® in Orche; a substitute can change the blanket’s texture, drape, finished dimensions, and yardage needs. If you use another yarn, choose a similar thickness and make a swatch before committing to the full blanket.
Optional but useful supplies include scissors, a measuring tape, and a row counter or removable stitch markers. These are not part of the stated materials list, but they can help you track the 40-inch length and keep your place in the repeat.
Step-by-step instructions
Abbreviations
- ch: chain
- dc: double crochet
- sl st: slip stitch
- RS: right side of the work
- WS: wrong side of the work
- sp: space
- rep: repeat
Blanket body
-
Make the foundation chain.
Chain 76. -
Work the first row on the right side.
Make 1 double crochet in the third chain from the hook. This counts as 2 double crochets. Make 1 double crochet in each remaining chain to the end. Turn. You should have 74 double crochets. -
Work the second row.
Chain 1. Make 1 double crochet in each of the first 2 double crochets. Then repeat the following sequence across the row: chain 1, skip the next double crochet, and make 1 double crochet in the next double crochet. Turn at the end of the row. -
Work the third row.
Chain 1. Make 1 double crochet in the first double crochet. Repeat this sequence across to the last double crochet: make 1 double crochet in the next chain-1 space, chain 1, and skip the next double crochet. Make 1 double crochet in the last double crochet. Turn. -
Repeat the body pattern.
Repeat the third-row instructions until the blanket measures 40 inches (101.5 cm) from the beginning. End after a wrong-side row. Do not fasten off.For this row, the chain-1 spaces are worked into on the next pass, while the next double crochet is skipped. Keep following the sequence as written rather than adding a double crochet into each stitch; that helps preserve the openwork pattern.
Fringe on the first short end
-
Work the first fringe row on the right side.
Starting at the edge where your yarn is still attached, repeat the following sequence across the blanket’s short end:- Chain 13.
- Slip stitch in the second chain from the hook and in each of the next 11 chains.
- Slip stitch in each of the next 2 stitches of the blanket.
Repeat the sequence to the end of the row, following the source instruction to work across the edge. Fasten off.
Each fringe strand is formed by the chain and the slip stitches worked back along it. Keep the chains and slip stitches relaxed enough that the fringe does not pull the blanket edge inward.
Fringe on the second short end
-
Join yarn at the foundation edge.
With the right side facing, join the yarn with a slip stitch to the first stitch at the foundation chain. -
Work the second fringe row.
Repeat the same fringe sequence across the second short end:- Chain 13.
- Slip stitch in the second chain from the hook and in each of the next 11 chains.
- Slip stitch in each of the next 2 stitches of the blanket.
Repeat to the end of the row, following the source instruction to work across the edge. Fasten off.
The source instructions do not give a separate edging or a more detailed instruction for the final repeat at either end of the fringe rows. Keep the fringe spacing consistent as you work, and avoid adding extra stitches or a border unless you are intentionally changing the design.
Ways to use your finished project
Drape the blanket over the back of a sofa or the arm of a favorite chair for an easy living-room accent. Its textured surface and fringe make it decorative even when it is not in use, while its soft, substantial fabric is handy for relaxing on cool evenings.
This throw also makes a personal housewarming or winter gift. If you’re making it for someone else, consider their room colors before choosing a yarn shade. Orche gives the blanket a warm, earthy look that pairs naturally with wood tones, cream upholstery, and other autumn-inspired décor.
For a neat presentation, fold the blanket so that one fringed end is visible and tie it with a simple ribbon or a length of coordinating yarn. If you plan to give it as a gift, include a care note based on the yarn label so the recipient knows how to wash and dry it.
How to care for your crochet blanket
Care instructions can vary by yarn, so use the care information printed on the Bernat® Sheepy® label as your first guide. If the label permits machine washing, use the recommended water temperature and a gentle cycle. A laundry bag can reduce rubbing against other items. Avoid washing the blanket with garments that may shed lint or transfer color.
Support the blanket when lifting it while wet. Heavy, damp crochet fabric can stretch under its own weight, especially when carried by one corner. If the label recommends laying it flat to dry, gently press out excess water without wringing, then reshape the blanket on a clean, dry surface. Arrange the fringe while the blanket is damp so the strands dry without knots or sharp bends.
Do not assume that the blanket needs blocking. If the fabric looks uneven, first check whether the care label allows the method you plan to use. Wet blocking, steam, or high heat can affect some yarns, so follow the yarn manufacturer’s instructions and test an inconspicuous area if you are unsure.
For long-term storage, make sure the blanket is clean and completely dry before putting it away. Fold it loosely and store it somewhere dry, away from direct sunlight. Avoid hanging it for long periods, since the weight may pull the fabric out of shape. When refreshing the fringe, gently separate tangled strands with your fingers rather than tugging on them.
Tips for success
- Count the foundation row carefully. The chain-76 foundation leads to 74 double crochets in the first row. Counting the stitches there gives you a useful reference before you begin the openwork.
- Mark the right side if needed. A removable marker at the right-side edge can help you confirm which side you are facing, especially when returning to the project after a break.
- Keep track of the repeat. In the third row, the sequence is a double crochet in the next chain-1 space, chain 1, skip the next double crochet. Missing a chain space or working into the skipped double crochet can change the texture and affect the edge.
- Watch the first and last stitches. The row begins and ends with double crochet stitches as written. These edge stitches help keep the blanket’s sides more orderly; check them before turning to the next row.
- Measure the body, not the fringe. The stated 40-inch length refers to the work from the beginning before the fringe is added. Lay the blanket flat and measure the body consistently rather than stretching it.
- Check your tension on the chain. A tight foundation chain can make the starting edge shorter and firmer than the rest of the blanket. If your chains tend to be tight, work them gently and evenly.
- Keep fringe tension relaxed. Slip stitches that are pulled too tight can draw in the short edge. Make the chain fringe with an even hand and compare several strands as you go.
- Take care with bulky yarn. Large, plush yarn can hide the tops of stitches. Feel for each stitch with your fingers and use good lighting so you don’t accidentally skip or add a stitch.
- Pause to check the shape. Lay the blanket flat from time to time. If the sides begin to angle or the edge looks uneven, check that you are working the same first and last stitches and following the row repeat correctly.
Creative variations
You can change the color while keeping the stitch pattern the same. A single shade gives the blanket a calm, unified look; stripes or color blocks can add contrast. If changing colors, plan where each new shade will begin and finish yarn ends securely. Extra ends may add finishing time, and a different yarn amount may be needed depending on your color plan.
A contrasting border is another option, but it is not included in the written pattern. Adding one may change the finished dimensions and use additional yarn. The pattern already finishes both short edges with fringe, so consider how a border will meet those strands before adding it.
To make the blanket wider, begin with a longer foundation chain while maintaining an appropriate pattern layout. The original instructions do not provide a width-repeat multiple, so make a small swatch or test section to confirm the chain count works cleanly with the first-row count and the double crochet and chain-space repeat. A wider blanket will require more yarn. To adjust the length, continue or stop the repeated body row at a different measurement; this also changes the yarn requirement.
A different yarn can give the blanket a noticeably different feel. A lighter yarn may make the fabric thinner and smaller, while a heavier yarn may create a denser, larger blanket and need a different hook. Make a swatch and check the drape before starting a full substitute-yarn version. Keep the fringe in mind as well: its length and appearance will change if the yarn thickness changes.
Frequently asked questions
Is this blanket pattern suitable for beginners?
It can work well for a confident beginner who knows how to chain, double crochet, and slip stitch. The main body repeats a simple sequence, but you’ll need to identify chain-1 spaces and keep track of which stitches to skip. If you’re new to crochet, practice the setup rows and a few repeats before continuing to the full length.
How much yarn does the pattern call for?
The pattern calls for 4 balls of Bernat® Sheepy® in Orche (63012). Each ball is listed as 8.8 oz/250 g and 149 yd/136 m, for a total of 596 yards (544 meters). A substitute yarn may require more or less depending on its thickness, your tension, and any size changes.
Can I use a different yarn?
Yes, but a different yarn can change the blanket’s size, softness, thickness, and drape. Choose a substitute with a similar thickness if you want a result closer to the original, and make a swatch before committing. Check the substitute’s care instructions too, since they may differ from those of the listed yarn.
Can I use a different crochet hook?
The pattern specifies a U.S. N/15 (10 mm) hook, or a hook size needed to obtain gauge. No gauge measurement is included in the supplied instructions. A different hook can make the stitches tighter or looser and affect the fabric’s dimensions and drape, so test with a swatch and choose a hook that produces a comfortable fabric.
How do I make the blanket larger or smaller?
To change the length, work more or fewer repeats of the third row before adding the fringe. To change the width, adjust the foundation chain, but the instructions do not state a width repeat multiple. Test the stitch layout on a small sample before making a much wider version. A larger blanket uses more yarn; a smaller one uses less.
Why is my blanket edge uneven?
Check that the first and last double crochet stitches are worked as written on each row. It is also easy to miss a chain-1 space or accidentally work into a skipped double crochet, which can alter the row and pull the edge out of shape. Lay the blanket flat periodically and compare both sides as you work.
How do I keep the fringe from pulling the edge inward?
Keep the chain and slip stitches at an even, relaxed tension. Tight slip stitches can shorten the edge and make it ripple or draw in. If you notice the edge tightening, loosen your work on the next strands and check that the blanket lies flat.
How should I wash the finished blanket?
Follow the care instructions on the yarn label. Use a gentle wash method and avoid wringing or lifting a wet blanket by one corner. If the label recommends flat drying, reshape the blanket and fringe on a flat surface and allow it to dry fully before storing.
Can I sell blankets made from this pattern?
The supplied pattern information does not state whether finished items may be sold. Check the original designer’s usage terms before selling a blanket made from the pattern.
Print
Family Room Crochet Blanket
A cozy, textured throw blanket made with soft, bulky yarn and a simple repeating stitch pattern, perfect for your living room or as a thoughtful handmade gift.
Materials
- Yarn: Bernat® Sheepy® (8.8 oz/250 g; 149 yds/136 m), Orche (63012) — 4 balls
- Crochet hook: U.S. N/15 (10 mm) or the size needed to obtain gauge
- Scissors
- Measuring tape
- Row counter or removable stitch markers
Instructions
- Chain 76 for the foundation chain.
- Make 1 double crochet in the third chain from the hook. This counts as 2 double crochets. Make 1 double crochet in each remaining chain to the end. Turn. You should have 74 double crochets.
- Chain 1. Make 1 double crochet in each of the first 2 double crochets. Then repeat the following sequence across the row: chain 1, skip the next double crochet, and make 1 double crochet in the next double crochet. Turn at the end of the row.
- Chain 1. Make 1 double crochet in the first double crochet. Repeat this sequence across to the last double crochet: make 1 double crochet in the next chain-1 space, chain 1, and skip the next double crochet. Make 1 double crochet in the last double crochet. Turn.
- Repeat the third-row instructions until the blanket measures 40 inches from the beginning. End after a wrong-side row. Do not fasten off.
- Starting at the edge where your yarn is still attached, repeat the following sequence across the blanket’s short end: Chain 13. Slip stitch in the second chain from the hook and in each of the next 11 chains. Slip stitch in each of the next 2 stitches of the blanket. Repeat the sequence to the end of the row, following the source instruction to work across the edge. Fasten off.
- With the right side facing, join the yarn at the foundation edge with a slip stitch to the first stitch at the foundation chain. Repeat the same fringe sequence across the second short end: Chain 13. Slip stitch in the second chain from the hook and in each of the next 11 chains. Slip stitch in each of the next 2 stitches of the blanket. Repeat to the end of the row, following the source instruction to work across the edge. Fasten off.
Notes
Ensure you count the foundation row carefully, and mark the right side if needed. Keep track of the repeat and maintain consistent tension.