DIY Pressed Flower Glass Candle Holder

This post contains Amazon affiliate links. As an Amazon Associate I earn from qualifying purchases.

This DIY pressed flower glass candle holder brings the delicate beauty of flowers together with the soft glow of candlelight. It’s a simple, hands-on décor project rather than a crochet pattern: there are no stitches, yarn, or crochet hook involved. The process suits beginners and anyone who enjoys making thoughtful handmade decorations, and it’s especially nice for a relaxed afternoon of crafting, a seasonal refresh, or a personal gift.

Why you’ll love this project

Pressed flowers turn an ordinary glass jar into a decorative keepsake, while a small bow of jute twine adds a natural, rustic finish. Because this project doesn’t require crochet skills or specialized tools, it’s approachable even if you’re new to crafting. The main work is choosing a flower arrangement you like and applying the adhesive carefully.

The design is easy to personalize, too. Use a single flower for a minimal look, or arrange several blooms and leaves for a fuller garden-inspired effect. It can make a charming addition to a dining table, shelf, or windowsill, and a finished holder can be a thoughtful handmade gift for someone who enjoys flowers or cozy home décor.

“I found it relaxing to arrange the flowers before sticking anything down. Taking a moment to plan the design made the finished jar look much more intentional, and the twine bow was an easy finishing touch.”

Before you begin

You’ll decorate a clean glass jar with pressed flowers, secure the flowers with adhesive, and finish the neck with jute twine. The process is straightforward: prepare the jar, plan the arrangement, attach the flowers, allow the adhesive to dry, and tie on the twine. The project involves no crochet techniques, stitch counts, or yarn requirements.

The time needed depends on the size of your jar, how detailed your flower arrangement is, and the drying time specified on your adhesive. You can complete the hands-on steps in a short crafting session, but allow enough time for the adhesive to dry fully before handling the decoration or placing anything inside the jar. Follow the instructions on the product label for drying and curing times.

Materials you’ll need

• Glass jar: Choose a clean jar with a smooth surface so the flowers are easier to arrange and attach. Remove any labels or residue before decorating.
• Pressed flowers: Select dry, flat flowers and leaves that fit the jar’s surface. Fragile petals are easier to handle with care.
• Jute twine: Use enough to wrap around the neck of the jar and tie a bow.
• Adhesive, such as Mod Podge: Check the product label to confirm it is suitable for your project and for the surface you’re decorating. Follow its application and drying directions.
• Scissors: Use these to trim the twine to the length you need.

Step-by-step instructions

1. Clean the jar. Wash or wipe the glass thoroughly to remove dust, grease, and any leftover label residue. Let the jar dry completely before decorating. Adhesive may not grip as well on a damp or dirty surface.

2. Plan your flower design. Arrange the pressed flowers on the jar before applying adhesive. Try different positions and combinations until you’re happy with the look. Planning first helps prevent fragile petals from being moved repeatedly once they’re sticky.

3. Attach the flowers. Use the adhesive to secure the pressed flowers to the glass. Work carefully so each flower lies against the surface. Apply the product as directed on its label, and handle delicate blooms gently to avoid tearing or crushing them.

4. Let the adhesive dry. Keep the jar undisturbed while the adhesive dries. Check the product instructions for the recommended drying time. Avoid wrapping the twine or handling the decorated area too soon, since that could shift the flowers.

5. Add the twine. Once the flowers are in place and the adhesive is dry, wrap jute twine around the neck of the jar. Tie it into a bow and trim the ends with scissors if needed. If the twine slips, adjust the wrap gently rather than pulling hard against the glass.

6. Add a candle if desired. You can place a candle inside the jar for a warm glow, but take care: decorative flowers, adhesives, and twine may be flammable, and their suitability for use near an open flame is not established here. For safer display, use a battery-operated candle or keep any flame well away from the decorations, and never leave a lit candle unattended.

Ways to use your finished project

Display the decorated jar on a shelf, side table, or mantel as a small botanical accent. It also works as a centerpiece for a casual meal or a seasonal gathering, especially when paired with other natural materials such as greenery, linen, or wooden serving pieces.

For gifting, choose flowers in colors the recipient enjoys, then finish the jar with a neat twine bow. It can be presented as a decorative container on its own. If you intend it to hold a candle, choose a battery-operated option unless you have confirmed that every material and the jar are suitable for safe candle use.

You can also make a small set of jars with different flower arrangements. Keeping the jars similar in shape while varying the blooms creates a coordinated display without making every piece identical. These are decorative crafts rather than food-safe containers, so don’t use them to store food or drink.

Cleaning and maintenance

This project combines glass, pressed botanicals, jute, and adhesive, so gentle care is important. Don’t assume the finished jar is waterproof or dishwasher-safe. Adhesive formulas vary, and moisture or scrubbing could loosen the flowers, soften the finish, or damage the twine.

For routine dusting, use a soft, dry cloth around the glass and avoid rubbing directly over the petals. If the surface needs more attention, check the adhesive label for cleaning guidance before using water or any cleaner. Don’t soak the jar, place it in a dishwasher, or scrub the decorated area unless the product instructions specifically allow it.

Store the holder somewhere dry and protected from knocks, excess humidity, and direct heat. Pressed flowers can become brittle over time, so handle the jar by its undecorated areas when possible. If the twine loosens, retie it gently without pulling against the flower arrangement.

Tips for success

• Start with a fully dry jar. A clean, dry surface gives the adhesive the best chance to bond as intended.
• Arrange before gluing. Test the flower placement first. This reduces the need to lift and reposition fragile petals.
• Choose flowers that lie flat. Bulky or curled pieces may not sit evenly against the glass and can be harder to secure.
• Handle pressed flowers gently. Move them with care, especially if they have thin petals or delicate stems. Pressed botanicals can break easily.
• Work in a calm, well-lit area. Good light makes it easier to see gaps and position each flower accurately.
• Follow the adhesive label. Different products can have different application, drying, and curing requirements. Don’t rush the drying stage.
• Test the twine wrap. If you want the bow centered, try wrapping the twine around the bare jar first to judge its position. Add the finished bow only after the adhesive has dried.
• Think about candle safety before lighting anything. The flowers, twine, and adhesive may be flammable. A battery-operated candle is a practical option for a decorative jar, and any open flame should never be left unattended.

Creative variations

• Make a minimalist design. Attach one small flower or a few leaves rather than covering the jar. A sparse arrangement keeps the glass visible.
• Create a fuller botanical look. Combine flowers and leaves in a planned cluster. More pieces may take longer to arrange and attach, and they can make the decorated area denser.
• Use a seasonal palette. Choose blooms that suit a spring, summer, autumn, or winter display. The flowers themselves provide the color, so you don’t need paint or extra decoration.
• Vary the twine finish. Tie a small bow, make a simple knot, or wrap the twine more than once around the neck. Additional wraps use more twine and may create a thicker finish.
• Make a coordinated set. Decorate several jars with a shared flower palette but vary the placement on each one. This creates a consistent group with a handmade feel.
• Choose a different jar shape. A wider jar provides more glass for arranging, while a narrow one limits the available design area. Changing the jar size or shape changes the finished holder’s proportions and the amount of decoration needed.

Frequently asked questions

Is this a crochet pattern?

No. Despite the crochet-oriented article format, this is a DIY pressed flower glass candle holder project. It uses a glass jar, pressed flowers, jute twine, adhesive, and scissors. There are no stitches, yarn, or crochet hook involved.

Is this project beginner-friendly?

Yes. The steps are simple and don’t require previous crafting experience. The main challenge is handling pressed flowers gently and allowing the adhesive to dry as directed. Planning the arrangement before gluing is especially helpful for beginners.

How long does it take to make?

The hands-on steps can fit into a short craft session, but the full project time depends on the arrangement and the adhesive’s drying instructions. Check the product label and wait until the adhesive is fully dry before tying the twine or handling the decorated area.

What kind of jar should I use?

A clean glass jar with a smooth surface is a practical choice because it gives the flowers a flat area to adhere to. Jar size and shape affect how much room you have for the design, so choose one that suits the flowers you plan to use.

Can I use fresh flowers instead of pressed flowers?

The instructions call for pressed flowers. Fresh flowers are not flat and may not adhere or dry in the same way. Using them could change the appearance and durability of the decoration, so pressed, dry flowers are the appropriate choice for this project.

How do I keep the flowers from shifting?

Arrange the flowers before applying adhesive, then secure them carefully as directed on the adhesive label. Let the jar sit undisturbed while the adhesive dries. Moving the flowers before they are secure can tear them or leave the design uneven.

Can I light a real candle inside the jar?

The instructions allow a candle to be placed inside the jar, but the flowers, twine, and adhesive may be flammable. The project materials have not been confirmed as safe for use with an open flame. A battery-operated candle is the safer decorative choice; never leave a lit candle unattended.

Can I wash the finished jar?

Don’t assume it is washable or waterproof. Water, soaking, dishwashers, and scrubbing may loosen the pressed flowers or damage the adhesive and twine. Follow the adhesive manufacturer’s cleaning guidance and use gentle, dry dusting for routine care.

Can I sell finished holders made from this project?

Check the original designer’s or source’s usage terms before selling finished pieces. No permission for commercial sales is stated here, so don’t assume that selling the finished holders is allowed.

Print