Ghostface Amigurumi Crochet Pattern for Halloween

This post contains Amazon affiliate links. As an Amazon Associate I earn from qualifying purchases.

The black yarn rests across my knees while the afternoon light turns the white stitches soft and gray. I hear the small pull of the hook through each loop, and the Ghostface shape slowly appears, first as a little oval, then as a familiar Halloween face. This Ghostface crochet pattern free project makes a spooky amigurumi Halloween figure that works for seasonal decor or a handmade gift. It feels playful without asking you to hurry, and the compact size makes it easy to carry from the couch to the porch when you need a few quiet minutes with your yarn.

Why Create a Spooky Ghostface Halloween Figure Is So Soothing to Crochet

This little figure has a steady rhythm. You work in rounds, watch the fabric gather into a three-dimensional shape, and add the face only after the soft stuffed body has taken form. The repetition gives your hands something simple to follow while your mind settles beside it.

I made mine on a rainy evening with a mug of coffee near the yarn basket. The first few rounds curled into a shallow cup, as crochet often does, but the piece grew heavy enough to settle in my palm after a while. That small change made the project feel less like a collection of stitches and more like a little character arriving.

Single crochet suits this figure because it creates a firm fabric with small, even stitches. The close texture keeps polyester fiberfill from peeking through, and the short rounds make it easy to pause without losing your place. A stitch marker takes care of the round openings, so you do not need to count every stitch from the beginning each time.

The face brings a different kind of attention. You place the eyes, shape the long mouth, and step back to see whether the expression feels balanced. It has the familiar theatrical look of a Halloween ghost, but the handmade texture keeps it friendly enough for a mantel, bookshelf, or basket beside an armchair.

Many people find crocheting calming because the hands repeat a small motion with a visible result. This project gives you that rhythm in a manageable size. You can finish it over two or three evenings, with the facial details taking the most patience.

How This Ghostface Crochet Pattern Comes Together

The figure begins with a magic ring, also called a magic circle, which lets you close the center of the first round neatly. You work single crochet stitches in continuous rounds, increasing to widen the head and decreasing to taper the lower portion. A single crochet, abbreviated sc, means that you insert the hook, pull up a loop, yarn over, and pull through both loops on the hook.

This pattern uses US crochet terms. UK readers often find American patterns confusing because the same stitch word can mean a different stitch there. Here, single crochet means sc, not the UK double crochet.

The shape stays simple, but stuffing evenly makes a real difference. Add small amounts as you go rather than waiting until the last round. That approach helps you fill the narrow top and lower point without forcing the stitches apart.

The project takes about two to three hours of actual crochet time, spread comfortably across two or three evenings. The body is beginner-friendly, while the face placement feels a little fiddly. If your hands need warming up, make the first round slowly and let the yarn slide through your fingers without pulling hard.

Pattern at a Glance

Here is the whole project in a small, friendly snapshot before you gather your supplies.

• Skill level: Easy, with basic amigurumi shaping
• Finished size: About 7 inches tall by 4 inches wide (18 cm tall by 10 cm wide)
• Gauge: 16 sc and 17 rounds measure 4 inches (10 cm), lightly stuffed
• Yarn: Worsted weight (weight 4, medium), about 120 yards total
• Hook size: H-8 (5.0 mm)
• Other supplies: Polyester fiberfill, 10 mm safety eyes, black embroidery floss, yarn needle, scissors, stitch marker, and tape measure
• Stitch multiple: The body is worked in continuous rounds and has no repeating stitch multiple
• Estimated time: Two to three hours, usually spread across two or three evenings

What You Need for This Project

• About 80 yards of white worsted weight yarn (weight 4, medium), from a 170-yard per 100 g skein, such as an easy-to-find worsted acrylic yarn
• About 40 yards of black worsted weight yarn (weight 4, medium), from a 170-yard per 100 g skein, for the hood edge and details
• One H-8 (5.0 mm) crochet hook, with half a size up or down fine depending on your tension
• Polyester fiberfill, about 2 ounces (57 g), for a softly firm shape
• Two 10 mm black safety eyes, or black yarn if you prefer embroidered eyes
• Black embroidery floss, about 24 inches (61 cm), for the long mouth
• Yarn needle with a large eye, for weaving in the ends
• Small scissors
• One stitch marker, optional but helpful for marking the first stitch of each round
• Tape measure, optional for checking the finished height and gauge

Acrylic yarn works well here because it keeps the finished figure affordable, washable, and easy to shape. For the yarn, you could use a smooth worsted acrylic from Lion Brand, Red Heart, or Caron. These are examples, not requirements. Choose a yarn with clear stitches and a soft but not fuzzy surface so the face remains easy to place.

A gauge swatch takes about twenty minutes, and it tells you whether your fabric will hold the stuffing. For this small project, make a flat section in single crochet and check that 16 stitches and 17 rounds measure 4 inches (10 cm). A looser gauge may leave gaps, so use a hook half a size smaller if the fiberfill shows through.

You can substitute another worsted weight yarn, including cotton or a cotton-acrylic blend, but the size and feel may change. Cotton creates a firm figure with less stretch, while a soft acrylic gives a slightly rounder shape. Keep the yarn weight similar, and avoid novelty yarn for the body because it hides the stitch openings.

Step by Step

1. Difficulty and setup: This project is easy and works in continuous rounds with no repeating stitch multiple. Make a magic ring, also called a magic circle, with white yarn, and place a stitch marker in the first stitch of each round.
2. Round 1: Work 6 sc into the magic ring. To make an sc, insert the hook into the ring, pull up a loop, yarn over, and pull through both loops. Pull the ring closed. You now have 6 stitches.
3. Round 2: Work 2 sc in each stitch around. This creates an increase, meaning two stitches in one stitch, and brings the round to 12 stitches. Move the marker as you finish the round.
4. Round 3: Repeat 1 sc in the next stitch, then 2 sc in the next stitch around. You will make 6 increases for a total of 18 stitches.

5. Round 4: Repeat 1 sc in each of the next 2 stitches, then 2 sc in the next stitch around. The round ends with 24 stitches. The fabric should look like a small white disk.
6. Rounds 5 through 10: Work 1 sc in each stitch around for 6 rounds. Keep 24 stitches in every round. The sides will begin to rise, and the piece may curl slightly before it settles into a small cup.
7. Rounds 11 and 12: Work 1 sc in each stitch around for 2 rounds, still keeping 24 stitches. Add a small amount of fiberfill after Round 12. Push it gently into the sides with the blunt end of your yarn needle.
8. Round 13: Repeat 1 sc in each of the next 2 stitches, then sc2tog around. Sc2tog means single crochet two together, a decrease that turns two stitches into one. You will have 18 stitches at the end of the round.
9. Round 14: Repeat 1 sc in the next stitch, then sc2tog around. The round ends with 12 stitches. Add more fiberfill, filling the upper corners and keeping the shape softly firm rather than hard.
10. Round 15: Work sc2tog around. You will have 6 stitches. If you notice a gap, add a little more stuffing before closing, but do not overfill because stretched stitches can reveal the white fiberfill.
11. Round 16: Work sc2tog around. You will have 3 stitches. Cut the white yarn, leaving a 6-inch (15 cm) tail, and pull the tail through the last loop. Use the yarn needle to close the opening and weave the tail into the body.
12. Shape the hood edge with black yarn. Insert the hook through the front loops of the stitches around the widest part of the body, join with a slip stitch, abbreviated sl st, and work 1 sc in each of the 24 front loops. A slip stitch moves the yarn without adding height. Fasten off and weave in the black end.
13. Add the face after the body feels fully cool and settled. Place the two safety eyes about 1 inch (2.5 cm) apart and roughly 1 inch (2.5 cm) below the top center. Secure the backs firmly inside the figure. For a child under three, embroider the eyes instead because small parts can create a safety risk.
14. Thread the black embroidery floss onto the yarn needle and stitch the long mouth from below the eyes toward the lower point. Use two or three loose passes to create the open, wavering shape. If the expression looks uneven, pull back the last few stitches calmly and try again. Check the last stitch of each round by counting from the marker; a missing stitch usually leaves a small gap or makes the edge slope too soon.
15. Finish by weaving in every yarn end through several nearby stitches, then trim the tails. Acrylic does not need blocking for this figure, and high heat can melt or flatten acrylic fibers. If the body looks slightly uneven, shape it with your hands while it is dry instead of pressing it with a hot iron.

The hook clicks softly against the stitch marker as the rounds grow. I once pulled back an entire round on a similar figure because one stitch disappeared near the marker. It felt annoying for a minute, but the shape corrected itself quickly once I returned to the right count.

Where This Ghostface Crochet Pattern Finds Its Place

The finished figure fits easily on a living room shelf, a mantel, or the small table beside the front door. During October, I like mine near a bowl of wrapped candy where the white face catches attention without taking over the room.

It also works well in a seasonal basket beside the armchair. You can bring it out with the other Halloween decorations, then fold it into a breathable storage box when November arrives. The compact size makes it a good project for a porch afternoon in late summer, when you want something festive but not a large blanket in your lap.

For a gift, place the figure in a small kraft box with a handful of wrapped treats and a handwritten note. A teenager may enjoy it on a desk, while a friend who loves handmade decorations could use it as a small addition to a fall mantel.

If you sell finished items, my own policy is simple: I credit the pattern source and list the item as handmade by me.

Caring for Your Ghostface Crochet Figure

Because this version uses acrylic yarn, wash it only when needed. Place the figure in a small mesh laundry bag and use a gentle cycle with cold water, or hand wash it in cool water with a small amount of mild detergent.

Press out water with a towel instead of wringing the stuffing. Dry the figure flat and reshape the face while it dries. Never hang it wet because the weight of the water can stretch the stitches and pull the stuffing downward.

Acrylic usually keeps its shape without blocking, but avoid a hot iron or direct high heat because acrylic can melt. If you need to smooth a small area, use steam from a distance without touching the iron to the yarn, then shape the piece with your fingers.

Store the figure folded into a breathable box or basket rather than hanging it by a loop or yarn tail. Keep it away from prolonged direct sunlight, which can fade dark yarn and yellow pale yarn over time. If you make a wool version, untreated wool can felt, while superwash wool tolerates machine washing more easily. Store wool with cedar or lavender for gentle moth protection.

Keep leftover yarn with its label so you have the dye lot if you need to repair the figure or make a matching friend later.

Small Ways to Make It Your Own

Try a different yarn size. Bulky yarn makes a larger, softer ghost, while sport weight creates a smaller figure with finer facial details. Adjust the hook to suit the yarn, and expect the finished size to change rather than forcing the original measurements.

Change the color story. White and black give the familiar Ghostface look, but pale gray, cream, or lavender can create a quieter seasonal decoration. You can also work the body in one color and add a contrasting hood edge for a simple color-blocked finish.

Choose a denser fabric. If your stuffing shows, switch from H-8 (5.0 mm) to a G-6 (4.0 mm) hook. A smaller hook makes tighter stitches, though your hands may need a few minutes to adjust to the firmer fabric.

Use single crochet for every part. This pattern already uses single crochet because it gives the best structure. If you experiment with double crochet, abbreviated dc, the fabric will grow faster but develop larger openings and a softer drape. Double crochet means yarn over, insert the hook, pull up a loop, then work through two loops twice.

Resize with care. To make a wider figure, add one increase round before the even rounds, then add one or two even rounds before decreasing. Keep the increases evenly spaced so the body stays round. A simple hanging loop at the top can turn the figure into a seasonal ornament, while a small ribbon around the neck makes a sweet gift presentation.

Frequently Asked Questions About This Ghostface Crochet Pattern

Can I use a different hook size for this Ghostface crochet pattern?

Yes, you can use a different hook size, but the finished size and fabric density will change. Try a G-6 (4.0 mm) hook if your stitches look loose or the stuffing peeks through. Use an I-9 (5.5 mm) hook if your hands pull tightly, but check that the fabric still closes firmly around the filling.

What yarn can I substitute for the worsted acrylic?

You can substitute another smooth worsted weight yarn, including cotton, cotton-acrylic, or superwash wool. Acrylic gives easy care and a springy stuffed shape, while cotton feels firmer and may show more stitch definition. Keep the yarn weight close to weight 4, medium, and make a small gauge check before starting the body.

What should I do if I find a mistake several rows later?

First, decide whether the mistake affects the shape or only one stitch. If the body still looks balanced, you may leave a tiny irregularity because the face and stuffing hide many small changes. If the count shifts the shape, pull back one round at a time, place the live loop on the hook, and calmly return to the last correct stitch.

Is this Ghostface figure suitable for a beginner?

Yes, this project suits a beginner who knows how to make a magic ring, single crochet, an increase, and a decrease. The body uses only single crochet in continuous rounds. The facial details take the most care, so take your time with eye placement and embroider the eyes instead of using safety eyes for a child under three.

How long does the crochet Ghostface figure take?

The figure takes about two to three hours of actual crochet time, often spread across two or three evenings. Your tension, stuffing pace, and face details will affect the timing. The body works up steadily, while closing the shape and stitching the long mouth may take an extra twenty minutes if you want the expression carefully balanced.

Does this pattern use US or UK crochet terms?

This pattern uses US crochet terms. That means sc refers to single crochet, while UK patterns use the same words differently. The main stitch here is US single crochet, and the pattern also explains slip stitch, increase, decrease, magic ring, and sc2tog when each one first appears.

Take the Time You Need

Let the figure grow at the pace your hands choose. The stitches do not need to look perfect from the first round, and a small pause will not undo the work you have made. Set the hook down beside your yarn, return when the room feels quiet again, and let this little Halloween ghost become yours one loop at a time.

Print